blog

blog

LED Explosion Proof Lighting – Petrochemical plant

Petrochemical plant area is mainly outdoor or indoor equipment such as tower, tank, pipeline, etc., most of which are zone 1 and zone 2 explosion-proof areas, and the requirements for explosion-proof performance of lamps are extremely strict. Most of them are outdoor areas, which require good water-proof and corrosion-resistant performance. At the same time, most of them are high-altitude areas of several meters or even hundreds of meters, high temperature and high pressure, so it is very difficult to replace and maintain the lamps. Therefore, the lamps used in petrochemical occasions are not only for lighting function, but also for safety and reliability.

High standard design and safety production guarantee

Environmental safety is the most important factor in petrochemical production. CESP LED Explosion Proof lighting solutions can ensure the safety of production personnel and equipment in the production process. CESP LED Explosion Proof lighting series fully meet and exceed the standard requirements of UL844,CE,ATEX, to ensure the explosion-proof reliability of lamps and lanterns, and at the same time, accurately combine the use habits of users, to prevent the impact of light pollution and glare on the work, so as to ensure the safety of production.

Safety lighting – flood lighting in pump area under pipe rack

All kinds of production pipelines are set up above the pump area under the pipe rack. There are many pumps, equipment, instruments and pipelines on the ground for various production purposes, and the environment is complex. Most of them are zone 1 and zone 2 explosion-proof areas, with flammable and explosive gas. The equipment operates 24 hours, and lighting plays an important role in the production process. CESP LED Explosion Proof lighting adopt thread explosion-proof and explosion-proof type, ⅡC explosion-proof grade, meeting the explosion-proof requirements of hydrogen and other flammable and explosive gases. 360 ° ring illumination light distribution design, lighting without dead angle, in the complex environment of pump area under the pipe rack, lighting each area, to provide security for production.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

blog

LED facade lighting building with led Linear light 

In the past, building outlines were used to lighten building outlines. Generally, LED guardrail tubes were used. With the development and popularization of LED linear lights, the use of LED linear lights has gradually increased.

Compared with traditional lamps, LED linear light body and appearance are more suitable for modern city lighting. LED linear lights on the one hand show the outline of the building that brightens the engineering building, on the other hand, the combined line lights can show more screen effects.

Regarding the use and subsequent maintenance of LED linear lights, it involves the material of the circuit boards of LED linear lights. In the production of LED linear lights, circuit boards, electronic components, housings, glue, wire and other basic raw materials.

Among them, the material of the PCB circuit board also occupies a very important position, and its materials and many types, high-quality materials can ensure long-term use. Especially for outdoor large-scale project lighting, it is necessary to ensure the performance of the lamps and lanterns to be stable in order to ensure the long-term optimal display of the later effects.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

blog

Heliport Inset Taxiway Center Lines Light

  1. Adopt the high quality of thermal conductivity of aviation aluminum weight casting it can provides excellent cooling environment for LED light source.
  2. With work stability, strong anti-interference ability and shock resistance.
  3. Full sealed structure base, with superior waterproof performance.
  4. With the anti-surge protection device.
  5. Adopt independent encapsulation of high-power LED light source, which has the specific of high light brightness, long service life.
  6. Shielding sealed power supply, with excellent waterproof and anti-jamming.

 

Usage notice

  1. Don’t use any out of nominal voltage,or will destroy equipment.
  2. Do not open it if the device is out of operation, in order not to be hurt by the internal high p
  3. After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
  4. Non-professional workers can not do the device maintenance, so as not to expand the error and be hurt.

Application

  1. Airport
  2. Heliport
  3. Helipad
blog

Places for the installation of aviation obstacle lights

  1. Aviation obstacle lights and signs shall be installed in buildings and structures with height limit or ultra-high height protected by airport headroom.
  2. Artificial and natural obstacles affecting flight safety on the air route and around the flight area shall be equipped with aviation obstacle lights and signs.
  3. For high-rise buildings and facilities on the ground that may affect flight safety, aviation obstacle lights and signs shall be installed and maintained in normal condition. Departments of public security, fire control and traffic have built helipad in the city, and the sky above the city is regarded as clear air. The tall buildings and structures in the city should be equipped with aviation obstacle lights and signs.
blog

CESP Heliport Aiming Point RGB

    • The lamp cover adopted PC material with excellent impact resistance and thermal stability
    • Great transparency
    • Auto-UV
    • Aging resistance
    • High Flammability Rate

This item signifies our commitment to provide each and every household or business in UAE. As a result, access to energy efficient and environmentally friendly lighting alternatives set at reasonably low and affordable prices.

And for more LED Helipad Lightings check out our LED Helipad Lightings product category. Need Product Recommendation or Design Inspiration for your projects? Check out our projects with featured products in our Completed Lighting Project page for ideas.

TAGS: LED Helipad Lighting,LED LIGHTING DUBAI,LED LIGHTING ABU DHABI

blog

CESP LED New Project (2020 – Warehouse Lighting

CESP lighting team supplied LED highbay lighting to a Multinational Company for their Extension warehouse. CESP lighting team provided UFO LED High Bay 150W and 200W lights for well distributed and uniform lighting to ensure safety.

This Multinational Company Warehouse can now make use of top quality, eco friendly and energy efficient lighting products as the company continues to grow in UAE.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

TAGS: LED WAREHOUSE LIGHT,LED WAREHOUSE LIGHT INSTALLATION,LED HIGHBAY LIGHT,LED GARAGE LIGHT,LED LIGHTING DUBAI,LED LIGHTING ABU DHABI

blog

Dubai Factory Lighting Retrofit -2021

CESP Lighting team provides a full LED lighting conversion of a leading pipe manufacturing company. It is set to install over 300 LED Highbay lights over a period of 2 years. The agreement covers a replacement warranty agreement, free delivery, and after-sales services.

CESP LED Highbay Lights can last to over 100,000 hours and is typically low maintenance. The Pipe manufacturing company enjoys its benefits through the use of high brightness and lower energy. It is set to save over thousand and thousands of pesos through this conversion.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

TAGS: LED COMMERCIAL LIGHTING,LED INDUSTRIAL LIGHTING,LED INSTALLATION,LIGHTING SITE SURVEY ,SAVE ENERGY,ENERGY EFFICIENT LIGHTING

blog

LED Warehouse Light Retrofit Dubai

One warehouse in Dubai has changed their existing lighting! They opted for LED lighting to improve the energy efficiency of the warehouse. In total, the project saved d 10675 kWh in a year and represents 68% in savings.

To improve the experience , CESP Lighting team undertook an LED retrofit project. “400W Metal halide light were removed and installed 150W LED highbay light.

The fixtures for the interior and the parking lot remain to be retrofitted with LED.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

TAGS: ENERGY SAVING FOR WAREHOUSES, ENERGY SAVINGS FOR FACTORIES, LED LIGHTING FOR FACTORIES, LED LIGHTING FOR INDUSTRIAL PREMISES, LED LIGHTING FOR WAREHOUSES, LED LIGHTING FOR WAREHOUSES ARTICLE, LED LIGHTS FOR FACTORIES, DUBAI WAREHOUSE,ABU DHABI WAREHOUSE,DUBAI FACTORY

blog

LED Lighting VS Traditional Industrial Lighting Products

•LED high bay lights vs Metal Halide high bay lights: If you’ve ever been to a ballgame, the lights blazing from overhead onto the field are likely metal halide. MH lamps are still common in sporting and warehouse/industrial/commercial uses. Some benefits of MH lights include decent color rendering and comparatively adequate foot-candle levels (as opposed to most incandescent lamps). Some major drawbacks are that they require warm up time to reach full brightness (sometimes 15-30 minutes), they are expensive to operate and maintain, and much of the energy they produce is wasted in the form of heat.

•LED high bay lights vs High Pressure Sodium (HPS) lights: HPS lights are another common lamp used in warehouse, industrial, business, and recreational facilities where high bay lighting is appropriate. Their benefits include affordable purchase prices compared to other industrial lighting, improved energy efficiency (low operating costs), and relatively long lifespan. HPS lighting technology is still among the most efficient and economical of conventional lamps, but LED high bay lighting is far superior on all 3 counts. The downsides of HPS lamps include the lowest quality color rendering in the lighting industry and a warm up period before reaching full intensity.

•LED high bay lights vs Fluorescent lights: Though not as common as the other 2 conventional types of warehouse lighting, fluorescent lighting is sometimes utilized in warehouse or industrial applications (primarily T12, T8, and T5 lights). Fluorescent lights are less expensive in initial costs and relatively efficient (especially when compared to other conventional bulbs). The cons include the presence of toxic mercury (which requires specialized waste disposal procedures), decreased lifetime if switched on and off daily, and the necessity for a ballast to stabilize the light.

The most and last important issue is working environment temperature, we heard many end-users complaint “ We know LED ,we already use LED before,but light turn dark or blink very quick,we do not believe LED “ Actually it depends on what kind of LED light quality level before you purchase, do not forget UAE weather is very hot all the year,so if not branded component LED ,their lift time is certainly shorter than branded one.

You might be saying that your conventional warehouse lights are not that old and seem to be serviceable, so you have no need for lighting retrofit services right now. However, there is FREE for you to have the lighting experts from CESP LED visit your facility, show you samples of our LED high bay lights, and prepare a proposal for upgrading your lights including the photometric analysis and a detailed ROI report. With the Return On Investment, upgrading your industrial lights and warehouse lights may be less expensive than you think.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

TAGS: DUBAI WAREHOUSE LIGHT INSTALLS , DUBAI WAREHOUSE MAINTENANCE COSTS , CASE STUDY DIRECTED TO WAREHOUSES, CASE STUDY FOR WAREHOUSE LIGHTING, CASE STUDY FOR WAREHOUSES, EXTERIOR LED LIGHTING, LED LIGHTING RECOMMENDED FOR WAREHOUSE INTERIOR LIGHTING, LED LIGHTS HELPS TO REDUCE MAINTENANCE COSTS FOR DUBAI WAREHOUSE, LED LIGHTING FOR WAREHOUSES, RECOMMENDED LIGHTING FOR WAREHOUSE LIGHTING, RECOMMENDED PRODUCTS TO REPLACE LIGHTS, REPLACE OLD LIGHTING WITH LED’S, SAVE ENERGY AND MAINTENANCE SAVINGS WITH LED, WAREHOUSE LED LIGHTING CASE STUDY, ABU DHABI WAREHOUSE LED LIGHTING , LED HIGHBAY LIGHT

blog

It Is Time To Retrofit Your Office Lighting With CESP LED Panel light

Commercial office lighting was previously dominated by fluorescent lamps, LED lighting can advantageously be implemented in office to create the best possible environment for employees, while at the same time the company will be able to minimize maintenance costs. It has been shown, that precisely this type of lighting can improve the quality of the workplace, which is clearly seen in productivity and employee well-being.

Our market-leading LED Ceiling Panel range includes the Eco, a glare-free LED fixture that provides direct light distribution. The Eco delivers bright, glare-free light output of 110Lm/W and is suitable for recess and ceiling mounting. It is features a pure aluminium frame and backboard allowing for low heat operation and stability, with a patented light guide providing uniform light which transmits over 93% light efficiency.

CESP supplied Mitsubushi with ultra-thin, 600mmx600mm square Eco LED Ceiling Panels that draw just 40W and have a colour temperature of 4000K (natural). They are designed to slot easily into an existing ceiling grid and offer beautiful, even illumination without glare or flicker. “The difference in the light quality of the new LED lighting compared to the old fluorescent tubes is astounding,” We have received very positive feedback from their staff since they were installed.”

TAGS: 300 X 300 LED CEILING PANELS, 600 X 600 LED CEILING PANELS, ECO CEILING PANELS, ECO LED CEILING PANELS, ECO LED PANEL, LED CEILING LIGHTS, LED CEILING PANELS, LED PANEL LIGHTS, PANEL LIGHTS,DUBAI ,PANEL LIGHTS,ABU DHABI

GET A FREE QUOTE
[]
1 Step 1
GET A FREE QUOTE
Nameyour full name
Phone
Enquirymore details
0 /
Previous
Next
Open chat
Welcome to CESP LED Electrical
How can we Help You?